1-Pack: Take out the router from the pack, connect an Ethernet cable from the any network port of your router to a LAN port on the Internet source (such as a broadband modem or fiber-optic modem), then connect your router to a power source. Afterwards, you can connect your phone to the router's default Wi-Fi (check the nameplate at the bottom
Aug 28, 2023 ¡ It's in the left panel under "System." 8. Create a new router login password. Type the current (default) password into the "Current password" field, then type and confirm a new password into the following two blanks. The username will stay the same, but you can reset the password to anything you wish.
Restart the router, disable and re-enable Wi-Fi, or restart your phone, then try again. Set a static IP address by doing the following: Touch the hotspot name, go to Show advanced options > IP settings > Static, and set the parameters by referring to the settings on other connected phones. Open Settings, search for and access Reset network
Jan 21, 2014 ¡ The reboot process is simple on most routers -- unplug your router's power cable, wait a few seconds, and then plug it back in. If you have separate modem, you may also want to try unplugging your modem's power cable and plugging it back in after a few seconds. Some devices may have a power switch, but the unplug-and-plug-back-in method applies
Method 2: From your mobile device, open a web browser and enter the default IP address in the address bar to access the mobile web-based management page (check the nameplate on the router for the default IP address). The mobile web-based management page provides basic Internet and Wi-Fi configuration features for your routers.
Finally, set on Range Extenderďź. Block 1: Choose the âUse the following IP addressâ. Fill with the info â IP address (routerâs LAN IP): 192.168.0.X. Subnet Mask: This subnet mask need to check on the main router (normally, the subnet mask is 255.255.255.0) Fill with the info ⥠Subnet Mask: 255.255.255.0. Default Gateway: Fill with
